rectron semiconductor technical specification features * plastic package has underwriters laboratory * glass passivated chip construction * 600 watt surage capability at 1ms * excellent clamping capability * low zener impedance * fast response time maximum ratings and electrical characteristics ratings at 25 o c ambient temperature unless otherwise specified. tvs tfmbj series do-214aa 600 watt peak power 5.0 watts steady state surface mount gpp gpp transient voltage suppressor dimensions in inches and (millimeters) maximum ra tings (at t a = 25 o c unless otherwise noted) devices for bipolar applications for bidirectional use c or ca suffix for types tfmbj5.0 thru tfmbj170 electrical characteristics apply in both direction 2002-12 ratings at 25 o c ambient temperature unless otherwise specified. 3. lead temperature at t l = 25 o c notes : 2. mounted on 0.2 x 0.2( 5.0 x 5.0mm ) copper pad to each terminal. 1. non-repetitive current pulse, per fig.3 and derated above t a = 25 o c per fig.2. 4. measured on 8.3ms single half sine-wave duty cycle = 4 pules per minute maximum. 5. v f = 3.5v on tfmbj-5.0 thru tfmbj-90 devices and v f = 5.0v on tfmbj-100 thru tfmbj-170 devices. ratings steady state power dissipation at t l = 75 o c (note 2) peak pulse current with a 10/1000us waveform ( note 1, fig.3 ) maximum instantaneous forward voltage at 50a for unidirectional only (note 3,4) symbol i fsm v f t j , t stg volts -55 to + 150 0 c units amps peak power dissipation with a 10/1000us (note 1,2, fig.1) minimum 600 100 see note 4 value operating and storage temperature range p ppm watts i ppm amps see table 1 peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) (note 2,3) unidirectional only p m (av) 5.0 watts 0.012 ( 0.305 ) 0.006 ( 0.152 ) 0.008 ( 0.203 ) 0.004 ( 0.102 ) 0.220 ( 5.59 ) 0.205 ( 5.21 ) 0.030 ( 0.76 ) 0.060 ( 1.52 ) 0.084 ( 2.13 ) 0.096 ( 2.44 ) 0.160 ( 4.06 ) 0.180 ( 4.57 ) 0.130 ( 3.30 ) 0.155 ( 3.94 ) 0.083 ( 2.11 ) 0.077 ( 1.96 )
rectron rating and characteristic curves ( tfmbj5.0 thru tfmbj170ca ) fig. 2 - pulse derating curve peak pulse power (ppp) or current t a , ambient temperature,( ) 02550 75 100 125 150 175 200 100 75 50 25 0 (ipp) derating in percentage,% measured at zero bias measured at stand off voltage,v wm f = 1.0 mhz vsig = 50mvp-p tj = 25 fig. 4 - typical junction capacitance c j , capacitance, pf v( wm ), breakdown voltace, volts 1.0 10 100 200 6,000 1,000 100 10 measured at zero bias measured at stand off voltage,vwm f = 1.0 mhz vsig = 50mvp-p tj = 25 fig. 5 - typical junction capacitance c j , junction capacitance,pf v( wm ), breakdown voltace, volts 1.0 10 100 200 6,000 1,000 100 10 pulse width (td) is defined as the point where the peak current decays to 50% of i ppm 10/1000usec. waveform as defined by r.e.a. peak value ippm tr = 10usec. fig. 3 - pulse waveform i ppm , peak pulse current,% t, time,ms 0 0 1.0 2.0 3.0 4.0 50 100 150 half value - i ppm 2 td fig. 1 - peak pulse power rating curve p ppm , peak pulse power, kw t p , pulse width, sec non-repetitive pulse waveform shown in fig.3 t a = 25 0.2x0.2"(5.0x5.0mm) copper pad areas 100 10 1.0 0.1 0.1us 1.0us 10us 100us 1.0ms 10ms bidirectional ifsm, peak forward surge current amperes fig. 6 - maximum non-repetitive forward number of cycles at 60 hz 200 100 10 1 10 100 8.3ms single half sine-wave (jeded method) surge current unidirectional unidirectional only
rectron transient voltage suppressors 600w series tvs diodes / do-214aa ( case 3 ) 600w breakdown voltage v br ( volts ) min. max. 33.3 6.40 7.82 7.07 6.40 6.67 8.15 6.67 7.37 7.22 8.82 7.22 7.98 7.78 9.51 7.78 8.60 8.33 10.2 8.33 9.21 8.89 10.9 8.89 9.83 9.44 11.5 9.44 10.4 10.0 12.2 10.0 11.1 11.1 13.6 11.1 12.3 12.2 14.9 12.2 13.5 13.3 16.3 13.3 14.7 14.4 17.6 14.4 15.9 15.6 19.1 15.6 17.2 16.7 20.4 16.7 18.5 17.8 21.8 17.8 19.7 18.9 23.1 18.9 20.9 20.0 24.4 20.0 22.1 22.2 27.1 22.2 24.5 24.4 29.8 24.4 26.9 26.7 32.6 26.7 29.5 28.9 35.3 28.9 31.9 31.1 38.0 31.1 34.4 33.3 40.7 36.8 36.7 44.9 36.7 40.6 40.0 48.9 tfmbj5.0 tfmbj5.0a tfmbj6.0 tfmbj6.0a tfmbj6.5 tfmbj6.5a tfmbj7.0 tfmbj7.0a tfmbj7.5 tfmbj7.5a tfmbj8.0 tfmbj8.0a tfmbj8.5 tfmbj8.5a tfmbj9.0 tfmbj9.0a tfmbj10 tfmbj10a tfmbj11 tfmbj11a tfmbj12 tfmbj12a tfmbj13 tfmbj13a tfmbj14 tfmbj14a tfmbj15 tfmbj15a tfmbj16 tfmbj16a tfmbj17 tfmbj17a tfmbj18 tfmbj18a tfmbj20 tfmbj20a tfmbj22 tfmbj22a tfmbj24 tfmbj24a tfmbj26 tfmbj26a tfmbj28 tfmbj28a tfmbj30 tfmbj30a tfmbj33 tfmbj33a tfmbj36 tfmbj36a 40.0 @i t ( ma ) 10 10 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 maximum reverse leakage at v wm i d ( ua ) 800.0 800.0 800.0 800.0 500.0 500.0 200.0 200.0 100.0 100.0 50.0 50.0 20.0 20.0 10.0 10.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 reverse stand off voltage v wm ( volts ) 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10.0 10.0 11.0 11.0 12.0 12.0 13.0 13.0 14.0 14.0 15.0 15.0 16.0 16.0 17.0 17.0 18.0 18.0 20.0 20.0 22.0 22.0 24.0 24.0 26.0 26.0 28.0 28.0 30.0 30.0 33.0 33.0 36.0 36.0 44.2 maximum peak pulse current i ppm ( amps ) 62.5 65.2 52.6 58.3 48.8 53.6 45.1 50.0 42.0 46.5 40.0 44.1 37.7 41.7 35.5 39.0 31.9 35.3 29.9 33.0 27.3 30.2 25.2 27.9 23.3 25.9 22.3 24.6 20.8 23.1 19.7 21.7 18.6 20.5 16.8 18.5 15.2 16.9 14.0 15.4 12.9 14.3 12.0 13.2 11.2 12.4 10.2 11.3 9.3 10.3 maximum clamping voltage at i ppm v c ( volts ) 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 smbj5.0 smbj5.0a smbj6.0 smbj6.0a smbj6.5 smbj6.5a smbj7.0 smbj7.0a smbj7.5 smbj7.5a smbj8.0 smbj8.0a smbj8.5 smbj8.5a smbj9.0 smbj9.0a smbj10 smbj10a smbj11 smbj11a smbj12 smbj12a smbj13 smbj13a smbj14 smbj14a smbj15 smbj15a smbj16 smbj16a smbj17 smbj17a smbj18 smbj18a smbj20 smbj20a smbj22 smbj22a smbj24 smbj24a smbj26 smbj26a smbj28 smbj28a smbj30 smbj30a smbj33 smbj33a smbj36 smbj36a rectron house no. rectron industry no.
rectron transient voltage suppressors 600w series tvs diodes / do-214aa ( case 3 ) 600w breakdown voltage v br ( volts ) min. max. tfmbj40 tfmbj40a tfmbj43 tfmbj43a tfmbj45 tfmbj45a tfmbj48 tfmbj48a tfmbj51 tfmbj51a tfmbj54 tfmbj54a tfmbj58 tfmbj58a tfmbj60 tfmbj60a tfmbj64 tfmbj64a tfmbj70 tfmbj70a tfmbj75 tfmbj75a tfmbj78 tfmbj78a tfmbj85 tfmbj85a tfmbj90 tfmbj90a tfmbj100 tfmbj100a tfmbj110 tfmbj110a tfmbj120 tfmbj120a tfmbj130 tfmbj130a tfmbj150 tfmbj150a tfmbj160 tfmbj160a tfmbj170 tfmbj170a 44.4 54.3 49.1 44.4 47.8 58.4 47.8 52.8 50.0 61.1 50.0 55.3 53.3 65.1 53.3 58.9 56.7 69.3 56.7 62.7 60.0 73.3 60.0 66.3 @i t ( ma ) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 maximum reverse leakage at v wm i d ( ua ) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 64.4 78.7 64.4 71.2 66.7 81.5 66.7 73.7 71.1 86.9 71.1 78.6 77.8 95.1 77.8 86.0 83.3 102 83.3 92.1 86.7 106 86.7 95.8 94.4 115 94.4 104 100 122 100 111 111 136 111 123 122 149 122 135 133 163 133 147 144 176 144 159 167 204 167 185 178 218 178 197 189 231 189 209 reverse stand off voltage v wm ( volts ) 40 40 43 43 45 45 48 48 51 51 54 54 58 58 60 60 64 64 70 70 75 75 78 78 85 85 90 90 100 100 110 110 120 120 130 130 150 150 160 160 170 170 maximum peak pulse current i ppm ( amps ) 8.4 9.3 7.8 8.6 7.5 8.3 7.0 7.8 6.6 7.3 6.2 6.9 5.8 6.4 5.6 6.2 5.3 5.8 4.8 5.3 4.5 5.0 4.3 4.8 4.0 4.4 3.8 4.1 3.4 3.7 3.1 3.4 2.8 3.1 2.6 2.9 2.2 2.5 2.1 2.3 2.0 2.2 maximum clamping voltage at i ppm v c ( volts ) 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103 93.6 107 96.8 114 103 125 113 134 121 139 126 151 137 160 146 179 162 196 177 214 193 231 209 268 243 287 259 304 275 notes : 1. v br measured after i t applied for 300ms. i t = square pulse or equivalent. 2. for bidirectional use c or ca suffixs for all types (ex. smbj5.0c,smbj170ca) 3. for bidirectional types having v wm of 10 volts and less, the i d limit is doubled. 4. all devices ul listed file# e211196. electrical characteristics apply in both directions. smbj40 smbj40a smbj43 smbj43a smbj45 smbj45a smbj48 smbj48a smbj51 smbj51a smbj54 smbj54a smbj58 smbj58a smbj60 smbj60a smbj64 smbj64a smbj70 smbj70a smbj75 smbj75a smbj78 smbj78a smbj85 smbj85a smbj90 smbj90a smbj100 smbj100a smbj110 smbj110a smbj120 smbj120a smbj130 smbj130a smbj150 smbj150a smbj160 smbj160a smbj170 smbj170a rectron house no. rectron industry no.
mounting pad layout rectron 0.083 min. (2.10 min.) 0.050 min. (1.27 min.) 0.220 ref 0.106 max. (2.69 max.) dimensions in inches and (millimeters)
|
